Available in standard or split ring in either leather or nylon. 26” long and 1” wide. Top quality roller buckles and ten holes for easy installation and size adjustment. Sewn and riveted, mildew resistant.
Weaver® Leather L Pads
Tough and highly economical. They have a soft 1” thick foam cushioned liner for extra comfort. The foam liner is layered between two layers of quality leather. Securely lock stitched for durability. Requires 2 leg straps per set.
Aluminum Leg Pads
Designed for climbers who want extreme leg support and comfort. They’re lightweight and won’t wear out like leather pads. Requires 2 leg straps per set. NOTE: These pads are designed to fit Buckingham, Bashlin and Klein climbers.
Buckingham Velcro Climber Pads
Attach to the top of the climbers and then wrap around the calf. 4” wide pad has a metal cinch loop for adjustment. Included an angled steel insert to keep the climber from chafing the leg. Fits all Buckingham and Bashlin climbers.
Buckingham Steel Climbers
Made from select high strength steel, making them incredibly durable. The 2-3/4” (64mm) spurs have replaceable gaffs and work great for general tree work. The 3-1/2” (89mm) spurs have permanently fixed gaffs and are recommended for thick barked trees. Both spurs have top sleeves that will adjust from 15-3/4” to 18-3/4” to calf length. Both climbers also include bottom nylon leg straps. Weight is approximately 4.6lbs. per leg.
Weaver Northwest Dee Saddle
Has a standard butt-strap seat that provides excellent support for hanging in trees, while still offering maximum freedom of movement. Extra wide back is foam filled and lined with soft leather. Nylon leg straps are lined with leather. This saddle now feautres four utility straps (two with rings and two with snaps), as well as five nylon loops on the back for accessories. ANSI approved. Medium Weighs approximately 6lbs. WARNING: This saddle is not intended for fall arrest.
Weaver Double Dee Saddle
Offers extreme maneuverability and is designed specifically for split tail climbing. Extra wide back is foam filled and lined with soft leather. There’s 6” rubberized belting for firm support. Nylon leg straps feature slip on leather pads for extra comfort. Features four utility straps (two with rings and two with snaps), as well as five nylon loops on teh back for accessories. ANSI approved. Medium weighs approximately 6lbs. WARNING: This saddle is not intended for fall arrest.
Incorporates a nylon prusik and an 8’ flipline, for a simple lanyard system that adjusts right at the belt, just where it’s needed. Made of stiff 3-strand Dacron.
Wire-Core Lanyard Systems
Wire Core fliplines have swivel rope snaps on one end and a thimbled eye on the other. Wire core gives added protection in case of a chainsaw mishap. Swivel snap prevents binding during flipping. WARNING: DO NOT use near electrical hazards!
Bentgate Accessory Carabiner
Handy and lightweight. Ideal for hanging saws and other tools from a saddle. Carabiner has a 3/4” opening with a 4-1/2” length. Rated to 5,500lbs. (25kN). NOTE: This is a non-critical carabiner; it is not to be used for personal support.
13” Chainsaw Strap
Made with a half twist (to keep the saw hanging straight) around a 2” ring. Nylon webbing is heat-sealed on the ends to prevent fraying. Ideal for arborists because the strap fits around the handle of a chainsaw so it remains handy while climbing. NOTE: Not for personal support.
2-N-1 Chainsaw Lanyard
Ideal for arborists who like to hook their saw close to the saddle with a ring, but still have the security of a backup snap in case of a mishap. Nylon webbing is heat-sealed on the ends to prevent fraying and is 40” long, including snap. NOTE: Not for personal support.
Tear Away Bungee Chinsaw Lanyard
Designed for safety and concenience. It is constructed with a tear away safety pack that activated when 200lbs. of force is applied. It measures up to 50” when fully extended to provide ample reach when cutting, but relaxes to 32”, which greatly reduces the possibility of getting tangled when climbing or working aloft. The saw, if dropped, will fall below the user’s feet without falling to the ground. NOTE: Not to be used with chainsaws exceeding 15lbs. in wight.
The Wolf Claw™
The only boot climbing harness that offers the perfect combination of comfort, support, durability and safety. With a protective outer shell, ventilation holes, reinforced steel skeleton, adjustable strap, non-skid bar, a comfortable fully supported neoprene lef pad and replaceable gaffs. Comes complete with tree gaffs, tip covers, boot harness with 2-1/2” – 6” extensions.
The latest in spur designs. They only weigh 2.4lbs. per spur and feature heat treated 2-5/8” replaceable gaffs that are ideal for general tree work. The top sleeve is adjustable from 15-3/4” (40cm) to 18-3/4” (48cm) to match your calf length. Made from 2014 T6 aluminum and manufactured to ASTM standard F-887 specs. Leg straps not included.