Order Mulch, Firewood & More Online

enter your search terms

FANNO Replacement Saw Blade with Hook FI-H13s-B 13 in. Blade for Pruning Saw

FANNO Replacement Saw Blade with Hook FI-H13s-B 13 in. Blade for Pruning Saw

$USD

$27.99USD

27.99 0.00 27.99
Quantity

Product Description

13.75" Fanno Saw w/ Hooked End Non-Tapered Pole Saw & Hand Saw Replacement Blade. The Fanno name has long been a standard in the Arborist industry. This Fanno blade has the addition of a hooked end which many professionals prefer in pole sawing operations to keep the saw in the kerf. Specifications: Manufacture: Fanno Length: 13.75" Teeth per inch: 6.00 Hardening: None Mount: Dual Saw Blade Terms: Blade Profile: The two common blade profiles are "tapered" and "non tapered." The tapered blade is thicker at the bottom where the teeth are and thinner at the top following edge. On a tapered blade the teeth do not have "set" (pushed left and right) therefore the blade following the teeth must be thinner to prevent drag in the saw kerf. A non-tapered blade has the same thickness from the top to the bottom. The teeth on a non-tapered blade have "set" to create a wider kerf at the teeth so the remaining blade can follow through the cut without drag. Typically a "non tapered" blade is more rigid than the tapered blade. Tooth Style: The three sided or tri-edge tooth has edges on both sides and across the top of the tooth. This style tooth cuts much faster then the conventional two sided tooth. The advantage of the conventional two sided tooth is it is easier to sharpen. Teeth/inch Teeth per inches refers to the number of saw teeth in one running inch of saw blade. The smaller the number of teeth per inch the "coarser" the blades is. A blade with a higher number of teeth per inch is described as a fine tooth blade. Hardening: Impulse hardening is the most common method for hardening saw teeth. The process involves using electrical impulses to create a very hard layer on the saw tooth edge. The advantage of impulse hardening is a much longer tooth life. The disadvantage to of an impulse hardened tooth is it cannot be sharpened. Mount: Many saw blades are punched with two different mounts (hole patterns) to allow one blade to serve as a pole saw blade and at the same time a replacement blade for its respective hand saw. (FI-H13s-B)

Northeast Nursery Garden Center
234 Newbury Street
Peabody, MA 01960
Telephone: 978-535-6550
Hours: Mon-Sat 7-6, Sun 8-5

Northeast Nursery Contractor Center
8 Dearborn Road
Peabody, MA 01960
Telephone: 978-854-4520
Hours: Mon-Sat 7-6, Sun 8-5
 

Northeast Turf & Irrigation
15 Tinker Ave
North Londonderry, NH 03053
Telephone: 603-518-5551
Hours: Mon-Fri 7am-5pm, Sat 7:30am-11:30am
Sunday Closed

 

Northeast Turf & Irrigation
48 Upper County Rd
Dennis Port, MA 02639
Telephone: 508-694-5135

Fax: 508-694-6820
Hours: Mon-Fri 7:30-4:30

Contact Us

captcha
$smarty.get.action prodcatalogue $form_name view_product