| Headwear |
| College V-Gard® Caps |
Meets or exceeds all applicable requirements for ANSI Z89.1-2003 for a Type I helmet. |
Topgard® HTE Protective Caps |
Meets or exceeds all applicable requirements for a Type I helmet (top-impact) as outlined in ANSI Z89.1-2003, Class E (electrical/high voltage) and NFPA 70E. |
 |
 |
| SmoothDome™ Slotted Cap |
Meets or exceeds applicable requirements for a Type I (top-impact) helmet as outlined in ANSI Z89.1-2003, Class E (electrical high voltage). |
Vanguard II ® Lateral Protective Helmet |
Meets or exceeds the applicable requirements of ANSI Z.89.1-2003 for Type I and Type II helmets Class E (electrical-high voltage) and G (electrical-low voltage) and is certified to CAN/CSA Z 94.1-2005, Class E, Canadian lateral protective helmet standard. |
 |
 |
| V-Gard® Protective Caps and Hats |
Meets or exceeds the applicable requirements for a Type I helmet (top impact) as outlined in ANSI Z89.1-2003, Class E and G. |
Advance® Cap - Vented and Non-Vented Styles |
Meets or exceeds the applicable requirements for a Type I helmet (top impact) as outlined in ANSI Z89.1-2003, Class C. |
 |
 |
| Custom Imprinting/Logo Express® Service |
Meets or exceeds the same applicable requirements of ANSI Z89.1 as non-imprinted headwear. Custom imprinting will not affect the integrity of the shell. |
Topgard® Protective Caps and Hats |
SEI Certified and meets or exceeds the applicable requirements for a Type I helmet (top impact) as outlined in ANSI Z89.1 2003, Class E (electrical-high voltage) and G (electrical-low voltage). |
 |
 |
| Freedom Series™ V-Gard Caps |
Meets all applicable requirements of ANSI Z89.1 for a Type I helmet (Class E). |
Plastic Bump Cap |
WARNING: This bump cap is not a safety helmet and does not Meets OSHA or ANSI requirements for head protection. Do not use as a sport safety helmet. Do not use when ANSI-compliant head protection is required or needed. |
 |
 |
| Skullgard® Protective Headwear |
SEI Certified and meets or exceeds the applicable requirements for a Type 1 helmet (top impact) as outlined in ANSI Z89.1 2003, Class G (electrical-low voltage). |
Comfo-Cap® Protective Headwear |
Meets or exceeds the applicable requirements for a Type I helmet (top impact) outlined in ANSI Z89.1 2003, Class G (electrical-low voltage). |
 |
 |
| Thermalgard® Caps and Hats |
SEI Certified and meets or exceeds the applicable requirements for a Type 1 helmet (top impact) as outlined in ANSI Z89.1 2003, Class G (electrical-low voltage). |
The Wildland® T Firefighters Helmet |
SEI-certified and Meets or exceeds all applicable requirements of ANSI standard Z89.1 (Class E) 2003 and NFPA 1977-1998. |
 |
 |
| Officially Licensed NFL V-Gard® Helmets |
Meets or exceeds all applicable requirements for ANSI Z89.1-2003 for a Type I helmet. |
Canadian Super V® Helmets for Lateral Protection |
Certified to the CAN/CSA Z 94.1-1992 standard, Class E and meets all applicable requirements of ANSI Z 89.1-2003 for a Type I helmet (Class E). |
 |
 |
| Head protection accessories are available at our Contractor Center. |
We invite you to stop by the Contractor Center
Our helpful staff is at your service all year round. Click here for directions or contact us for assistance. |
Apply for our Wholesale Program :
For detailed information on our
qualifications and terms, click here. |
MSA is the world's leading manufacturer of sophisticated safety products designed to protect people throughout the world. Sophisticated safety products typically integrate any combination of electronics, mechanical systems and advanced materials to protect users against hazardous or life-threatening situations. We can special order any size or style you are looking for in a hard hat.
